Heat Gun Crafts Bubble Remover 6.6Ft Cable Dual Temperature 300W
Drying PaintUSD $18.50
Condition : New
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
Heat Gun Crafts Bubble Remover 6.6Ft Cable Dual Temperature 300W Drying Paint
Product Description Heat Gun Features:
100% Brand New and High Quality ABS and PC plastic material, it equip with the stainless steel bracket to rotate 100 degress. It is Very compact and durable, practical
Keeping 5-6cm distance from work and about a 45 degree angle to heat until it is completed. It not only can add its hardness, but also its brightness
There are heat vents in left and right sides to decreased the internal temp and extend its lifetime
Heat Gun for Epoxy Resin- Heat Blower Hot Air Paint Heater for Shrink Wrap Tubing Small Epoxy Dryer Craft Heat Tool for Cup Turner Spinner Cellphone
This excellent compact heat gun can be used for heating shrinkable film, embossed powder,rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun
The temprature can not be adjusted, but in theory, it can reach at about 200 degree within a few seconds abstractly. But do not use it more than 10 minutes, just you can turn off then turn on again for working continuously Mini Heat Gun
High quality ABS anti-slip hand-hold part outside have high temperature resistance
The temperature control device and micro-circulation cooling system inside will always keep you safe
Heat up to 200°C/390°F quickly within few seconds
Two professional heat vents reduce the internal temperature of the heat gun and extend its life
100°adjustment stainless steel stand, flexible & self-support
300W save energy & On/Off switch give more safe Widespread Usage:
Embossing powder
Heat shrinkable film
Volume
Stamp
Quick drying paint, glue, catalytic bonding
Rapid thawing
Shrink PVC for packaging
DIY handmade soap or candle Heat Gun Specification:
Material: Plastic ABS+PC
Cable length: 6.56FT /180 cm
Rated Power: 300W
Rated voltage:110v
Power: 50-60Hz
Working time: 8 minutes
Power type: AC power supply
Type: Constant temperature
Package includes:
1 x Hot Air Gun
1 x English manual Attention:
-Do not touch with water! Do not touch the hot nozzle.
-Do not use outdoor. Keep it out reach of children. Keep 5-6cm distance between the heat tool and itrm.
-Do not use more than 10 minutes continuously to prevent overheated.
-This hot air gun is specially made for DIY, it can’t not use in industry aspect Notice:
Can not be disassembled and welded small patch.
Do not use a hot air gun to blow directly at 90 degrees.
It is recommended that the air outlet of the hot air gun is 5-6cm away from the heated article.
Working Time: 6-8 mins(no more than 10 mins)
Please turn off if the temperature is raised, and use after cooling. Item model number MF300 Part Number MF300 Batteries Required? No Voltage 110 Volts Power Source ac/dc Item Package Quantity 1 Color Black Product Dimensions 8.27 x 2.36 x 1.97 inches Material Plastic Handle/Lever Placement Right Number of Handles 1 Item Weight 11.3 ounces Batteries Included? No Measurement System English/Standard Usage Bar Cutting Number Of Pieces 1 Wattage 300 watts Included Components Charger ShippingFast shipping is very important for us. Our standard US shipping service is FREE. We ship outside of the contiguous USA for free only for some smaller packages - extra charged may apply Please check the international shipping fees for international shipments outside of the USA - Buyer is responsible for all customs and fees Returns and payment Only eBay and PayPal is accepted at the moment We offer a 30 days FREE return policy from checkout date. Customer Service and Feedback Your feedback very important to us, after you get your package and you are satisfied with our service please leave us positive feedback If you have any problem with your order / any questions please before leave any type of feedback Our customer service team usually responds in under 12 hours during normal business days. Please don't send two messages with the same content to avoid delays in response. For any questions, using eBay contact system Please visit our eBay store to check out other items for sale! Thank you for shopping at our store.
Product Description Heat Gun Features:
100% Brand New and High Quality ABS and PC plastic material, it equip with the stainless steel bracket to rotate 100 degress. It is Very compact and durable, practical
Keeping 5-6cm distance from work and about a 45 degree angle to heat until it is completed. It not only can add its hardness, but also its brightness
There are heat vents in left and right sides to decreased the internal temp and extend its lifetime
Heat Gun for Epoxy Resin- Heat Blower Hot Air Paint Heater for Shrink Wrap Tubing Small Epoxy Dryer Craft Heat Tool for Cup Turner Spinner Cellphone
This excellent compact heat gun can be used for heating shrinkable film, embossed powder,rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun
The temprature can not be adjusted, but in theory, it can reach at about 200 degree within a few seconds abstractly. But do not use it more than 10 minutes, just you can turn off then turn on again for working continuously Mini Heat Gun
High quality ABS anti-slip hand-hold part outside have high temperature resistance
The temperature control device and micro-circulation cooling system inside will always keep you safe
Heat up to 200°C/390°F quickly within few seconds
Two professional heat vents reduce the internal temperature of the heat gun and extend its life
100°adjustment stainless steel stand, flexible & self-support
300W save energy & On/Off switch give more safe Widespread Usage:
Embossing powder
Heat shrinkable film
Volume
Stamp
Quick drying paint, glue, catalytic bonding
Rapid thawing
Shrink PVC for packaging
DIY handmade soap or candle Heat Gun Specification:
Material: Plastic ABS+PC
Cable length: 6.56FT /180 cm
Rated Power: 300W
Rated voltage:110v
Power: 50-60Hz
Working time: 8 minutes
Power type: AC power supply
Type: Constant temperature
Package includes:
1 x Hot Air Gun
1 x English manual Attention:
-Do not touch with water! Do not touch the hot nozzle.
-Do not use outdoor. Keep it out reach of children. Keep 5-6cm distance between the heat tool and itrm.
-Do not use more than 10 minutes continuously to prevent overheated.
-This hot air gun is specially made for DIY, it can’t not use in industry aspect Notice:
Can not be disassembled and welded small patch.
Do not use a hot air gun to blow directly at 90 degrees.
It is recommended that the air outlet of the hot air gun is 5-6cm away from the heated article.
Working Time: 6-8 mins(no more than 10 mins)
Please turn off if the temperature is raised, and use after cooling. Item model number MF300 Part Number MF300 Batteries Required? No Voltage 110 Volts Power Source ac/dc Item Package Quantity 1 Color Black Product Dimensions 8.27 x 2.36 x 1.97 inches Material Plastic Handle/Lever Placement Right Number of Handles 1 Item Weight 11.3 ounces Batteries Included? No Measurement System English/Standard Usage Bar Cutting Number Of Pieces 1 Wattage 300 watts Included Components Charger Shipping
Returns Accepted for this item if it's within 30 Days
Price type
IN STOCK
OUT STOCK
.
